Terms containing 容差

Subject	Chinese	English
tech.	下容差限	lower tolerance limit
econ.	不合格产品容许公差百分比	lot tolerance percent defective
space	不符合容差的	out of tolerance
construct.	严格精确容差	stringent tolerance
tech.	严格容差	stringent tolerance
space	严格容差要求	stringent tolerance requirement
textile	交货容差	delivery allowance
el.	位置容差	positional tolerance
el.	信元延迟偏差容限	cell-delay variation tolerance
el.	信元延迟容许偏差	cell-delay variation tolerance
IT	信元延迟方差容限	cell delay variation tolerance
tech.	像差容限	tolerance for aberration
tech.	全部容差	all-in allowance
busin.	公差容许量	tolerance permissible
el.	共模电压容差	common-mode voltage tolerance
tech.	准直容差	alignment tolerance
el.	几何与真实定位容差	geometrical and true positioning tolerance
tech.	凸出容差	protrusion allowance
construct.	凹度容差容限	valley tolerance
tech.	凹度容差	valley tolerance
space	分散容差	scatter tolerance (用于热模锻)
tech.	制作容许差	work tolerance
bridg.constr.	制作容许差	work tolerance
space	制导容许误差	guidance tolerance
space	制造容差	manufacturing tolerance
wind.	制造容差	fabrication tolerance
tech.	加工容许差	work tolerance
telecom.	包层容差区	core tolerance field
telecom.	包层容差区	cladding tolerance field
mil., air.def.	发射机频率容差	transmitter frequency tolerance
commer.	可以容许的误差	allowable error
IT	可变容差带压缩	variable tolerance band compaction
tech.	可变容差数据精简	variable-tolerance-band compaction
wind.	可容许公差	permissible tolerance
busin.	可容许误差	excusable error
tech.	可容许误差	permissible error
textile	合格容差幅度	acceptable tolerance range
textile	后容差	back part tolerance
textile	商业公定容差	commercial tolerance
textile	商业公定容差	commercial allowance
tech.	商店容差	shop allowance
oil	固定容许偏差范围的数据精简	fixed-tolerance-band compaction
busin.	固定容差范围数据精简	fixed-tolerance-band compaction
gen.	固定容差范围的	fixed-tolerance-band
IT	固定容差范围紧凑法	fixed-tolerance-band compaction
busin.	国际容许误差	international tolerance
tech.	地基容许沉降差	permissible settlement difference of foundation
telecom.	增益容差	gain tolerance
mil., air.def.	多普勒容差	Doppler tolerance
geophys.	大容量负差动传导性	bulk negative differential conductivity
space	天线表面容差	antenna surface tolerance
busin.	安全容差	safety allowance
tech.	安装偏差容许限	erection allowance
bridg.constr.	安装容许偏差	erection tolerance
oil	安装容许误差	erection tolerance
el.mach.	安装容许误差	erecting tolerance
tech.	安装容许误差安装公差	erection tolerance
space	定位容差	positional tolerance
tech.	实际容差	actual allowance
gen.	容许偏差	tolerance
gen.	配合容许误差	allowance
avia.	容差	error tolerance
tech.	容差	admittance
busin.	容差	tolerated error
busin.	容差	tolerance error
el.mot.	容差	tolerance
agric.	容差	tolerance (tolerantia)
avia.	容差	admission
archer.	容差瞄准时略偏一侧以抵消风力影响	allowance
archer.	容差	allowance
gen.	容差	overmeasure
busin.	容差上限	upper tolerance limit
busin.	容差上限	upper tolerance
auto.	容差加工余量	allowance
commun., railw.	容差分析	fault-tolerant analysis
IT	容差分析	tolerance analysis
avia.	容差分配	allowance allocation
avia.	容差分配	tolerance allocation
tech.	容差极限	tolerance limit
el.	容差的	tolerant
textile	容差符号	tolerance symbol
avia.	容差范围	tolerance range
el.	容差表	table of allowance
avia.	容差要求研究	tolerance requirements studies
avia.	容差记录	clearance record
wind.	容差试验	allowance test
textile	容差配色	commercial matching
CNC	容差限度	tolerance limit
el.	容性耦合误差	capacitive coupling error
tech.	容易产生误差的	error-prone
auto.	容许许用误差	allowance error
construct.	容许〔许用〕误差	allowance error
expl.	容许偏差	acceptable deviation
space	容许偏差	allowable tolerance
space	容许偏差	allowable deviation
eng.geol.	容许偏差	permissible aberration
eng.geol.	容许偏差	permissible deflection
hydroel.st.	容许偏差	tolerance
archit.	容许偏差	leeway
wind.	容许偏差	permissible variation
wind.	容许偏差	permissible deviation
bridg.constr.	容许偏差	allowance
met.	容许偏差	allowable variation
tech.	容许偏差	tolerable deviation
auto.	容许偏差	tolerance band
tech.	容许偏差	tolerant deviation
mil., air.def.	容许偏差	tolerance (deviation)
wind.	容许偏差	tolerance deviation
tech.	容许偏差	allowance deviation
space	容许偏差百分率	percentage of permissible deviation
busin.	容许偏差范围	region of admissible deviations
tech.	容许公差	tolerance
oil	容许公差	acceptable tolerance
tech.	容许公差	limit measurements
agric.	容许公差	size tolerance
wind.	容许公差	allowable tolerance
hydroel.st.	容许公差	permissible tolerance
tech.	容许公差	common difference
agric.	容许公差	tolerance for substandard products
tech.	容许公差	accepted tolerance
tech.	容许加工偏差	permissible manufacturing deviation
tech.	容许压力差	permissible pressure difference
tech.	容许压力差	allowable pressure difference
bridg.constr.	容许压力差	permissible pressure difference
busin.	容许变差	admissible variation
tech.	容许尺寸误差	permissible dimensional error
tech.	容许尺寸误差	dimensional tolerance
tech.	容许尺寸误差	acceptance off-size
bridg.constr.	容许差	allowable tolerance
tech.	容许差度	permissible deviation
tech.	容许差异沉降量	allowable differential settlement
econ.	容许差额	margin of tolerance
earth.sc.	容许总误差	total tolerance error
avia.	容许操纵误差	allowable steering error
tech.	容许正偏差	accommodate positive tolerance
tech.	容许温差	allowable temperature differential
tech.	容许现差	permissible tolerance
el.mach.	容许电压偏差	allowable voltage deviation
textile	容许的数量差额	allowance
tech.	容许的误差	tolerance
food.serv.	容许的较小偏差	acceptance with minor deviations
tech.	容许离差	tolerance deviation
tech.	容许离差	admissible deviation
tech.	容许离线偏差	permissible lateral deviation
tech.	容许色差	acceptability of colour match
tech.	容许色差	color tolerance
tech.	容许色差	colour tolerance
tech.	容许色差	acceptability of color match
tech.	容许误差	acceptance deviation
expl.	容许误差	acceptable variation
expl.	容许误差	acceptable discrepancy
wind.	容许误差	error excepted
wind.	容许误差	permissible variation
textile	容许误差	acceptable error
space	容许误差	admission error
hydroel.st.	容许误差	admissible error
hydroel.st.	容许误差	permissible error
hydroel.st.	容许误差	allowance error
hydroel.st.	容许误差	allowable error
eng.geol.	容许误差	tolerance error
wind.	容许误差	error allowance
telecom.	容许误差	toleranced error
commer.	容许误差率	allowance error
archit.	容许误差	bending allowance
UN, geol.	容许误差	margin of error
archit.	容许误差	allowable deviation
econ.	容许误差	the permissible error
tech.	容许误差	allowance
busin.	容许误差	tolerated error
busin.	容许误差	acceptance error
tech.	容许误差	tolerance
gen.	容许误差	admissibe error
tech.	容许误差修正量	allowance
tech.	容许误差极限	limit of allowable error
tech.	容许误差极限	limit of permissible error
tech.	容许误差极限	limit of admissible error
commer.	容许误差级判据	acceptable defect level measure
commer.	容许误差级度量标准	acceptable defect level measure
tech.	容许误差范围	range of allowable error
tech.	容许误差范围	limit of allowable error
agric.	容许误差限度	limit of allowable error
tech.	容许转速偏差	speed tolerance
oil	容许限差	accepted tolerance
tech.	容量压差曲线	capacity head curve
tech.	容量差异	capacity volume variance
space	容限公差	allowable tolerance
agric.	容限误差	tolerance error
space	小批容差	small lot allowance
el.mach.	尺寸容差	dimensional allowance
bridg.constr.	尺寸容差	dimensional tolerance
tech.	尺寸容差	size tolerance
commer.	工作容差	performance tolerance
tech.	工厂容差	shop allowance
el.	差分输入电容	differential input capacitance
oil	差分极板电容器	differential plate capacitor
IT	差分格式的相容性	consistency of difference scheme
el.	差分电容器	differential capacitor
el.	差分电容率［介电常数］	differential capacitivity
tech.	差动可变电容器	differential variable condenser
el.	差动电容传感器	differential capacitive pickup
IT	差动电容器	differential capacitor
tech.	差动电容器	differential condenser
tech.	差容式加速度传感器	differential capacitance acceleration transducer
tech.	布局容差	topology tolerance
tech.	干扰容差	disturbance allowance
agric.	平均容许误差	average allowable error
telecom.	平均差错容量区	average error capacity region
tech.	平方误差相容性	square error consistency
avia.	应力方法及容差	stress method and allowable
tech.	建筑构件的容许偏差	permissible deviation of constructional elements
el.mach.	形状容差	form tolerance
oil	径向容许偏差	radial tolerance
met.	总容差	total allowance
commer.	总容差	total tolerance
tech.	批重容差	lot weight tolerance
textile	按煮练材料的商业容差计算	commercial allowance with scoured material basis
met.	收缩容差	patternmaker's shrinkage
tech.	收缩容差	shrinkage allowance
avia.	故障容差	fault tolerance
avia.	故障容差惯性导航系统	fault tolerant inertial navigation system
el.mach.	效率容差	efficiency tolerance
tech.	施工容许误差	construction fit
oil	无容差	zero allowance
construct.	无零容差	zero allowance
space	时间容差	time tolerance
space	最大容许误差	maximum allowable error
space	最大容许误差	maximum permissible error
tech.	最大容许误差	maximum allowance error
bridg.constr.	最大容许误差	limit of error
tech.	最大容许误差	margin of error
tech.	最热点温度容差	hottest-spot temperature allowance
shipb.	机加工容许偏差	machining tolerance deviation
tech.	构造容许误差	construction tolerance
tech.	构造容许误差	constructional tolerance
el.	校准容许误差	alignment tolerance
met.	正容差	positive allowance
tech.	比容偏差	steric anomaly
ecol.	比容偏差	specific volume anomaly
tech.	浚挖容许误差	dredging tolerance
tech.	浚挖深度容许误差	dredging depth tolerance
gen.	消隐脉冲到色同步脉冲之间的时间容差	blanking-to-burst tolerance
busin.	温度容差	Time,Temperature Tolerance
tech.	湿法选矿后的水分容差	wet wash allowance
space	滑码容差	bit slip tolerance
tech.	灯丝电压容许公差	allowable tolerance of filament voltage
tech.	热比容偏差	thermosteric anomaly
el.	电容容许偏差	capacitance tolerance
IT	电容允许偏差	capacitance tolerance
shipb.	电容公差	capacitance tolerance
tech.	电容误差分选仪	capacitance error selector
space	电容量允差	capacitance tolerance
telecom.	电平误差容许值	level tolerance
el.	电阻电容差动电路	capacitive differentiator circuit
tech.	磨损容差	wear allowance
tech.	磨损容差	tear-and-wear allowance
expl.	粒度误差容限	tolerance of wrong size
el.	精度-容差比	precision/tolerance ratio
tech.	精确容差	stringent tolerance
met.	紧密容差	close tolerance
telecom.	纤心容差区	core tolerance field
telecom.	绝对容差	absolute tolerance
tech.	绝缘容差	insulation allowance
textile	缝接容差	seam allowance
oil	罐容积测定误差	tank calibration error
avia.	翼弦高度容差	chord height tolerance
tech.	色差容限	colour tolerance
tech.	色差容限	color tolerance
space	色纯度容差	color purity allowance
space	表面容差	surface tolerance
telecom.	表面容差区	surface tolerance field
tech.	装配容许偏差	erection allowance
tech.	角度容许误差	angle tolerance
tech.	设备容差	device tolerance
el.	设备容差修正程序	equipment allowance revision program
avia.	试验容差分配	test tolerance distribution
avia.	试验容差分配研究	test tolerance distribution study
bridg.constr.	误差容许值	error allowance
fin.	误差容许程度	mistake tolerance
space	误差容许限	error allowance
tech.	误差容限	error tolerance
tech.	误差容限	error margin
tech.	负容差	negative allowance
oil	负容许误差	negative allowance
space	超出容差公差	out of tolerance
tech.	距离容许误差	distance tolerance
tech.	轨道偏差容许限度	allowance of track irregularity
tech.	轨道几何尺寸容许偏差	track geometry tolerance
railw.	轨道几何尺寸容许公差	track geometry tolerances
tech.	转矩值容许误差	torque allowance
tech.	转矩容许误差	torque allowance
IT	软件实现容差	software-implemented fault tolerance
avia.	载波频率容许偏差	carrier frequency tolerance
space	运用容差	operational tolerance
earth.sc.	运输容器/接收容器计量差	shipper/receiver difference
auto.	进气系统/发动机进气量容差	air-flow tolerance
tech.	逐批容差	lot tolerance
el.	速度容差记录	speed-tolerant recording
tech.	野外容许偏差	field tolerance
busin.	错误误差容许限	misleading error allowance
fin.	长短款可容许误差率	allowable percentage of cash overage or shortage
el.	限制容差状态	limit tolerance state
avia.	限定容差	limited clearance
wind.	零容差	zero allowance
tech.	零误差容量	zero error capacity
space	预选容许误差	preselected tolerance
oil	频差容限	frequency tolerance
telecom.	频率容差	frequency tolerance
mil., air.def.	频率容差容限	frequency tolerance
space	验收容差限	acceptance tolerance
tech.	验收容许偏差	acceptance tolerance
tech.	验收容许偏差	acceptance permissible variation
archit.	验收容许公差偏差	acceptance tolerance
tech.	验收容许误差	acceptance permissible deviation
el.	高容差三约瑟夫逊结电流注人逻辑器件	high-tolerance three-Josephson-junction current-injection logic device