machine throughput(Figure 5 indicates that in addition to gas flow rate, machine through-put and slab width affect the flow pattern of steel in the mold. 如图 5 所示，除气体流量外，铸机过钢量和板坯宽度也对结晶器内钢水流动模式产生影响。)
bricklaying robot(① When the brick has been centred on the upper platform, the bricklaying robot picks it up with the help of suction pads, carries it to the calculated lay-down position and lets the gripper do the final positioning of the brick before returning back to pick-up position. 当把砖放置到上部平台的中心位置时，砌砖机器人借助于吸盘将砖拿起，运送到计算好的砌砖位置并使用夹钳对砖进行最终定位，然后返回到拿砖位置。② There, individual bricks are handed over to the bricklaying robot by a depalletising mechanism. 在那里使用托板卸货机构将砖一块一块地转送给砌砖机器人。)
continuous casting mold(In the beginning, the tundish was merely a vessel used to deliver liquid steel from the ladle to the continuous casting mold. 起初，中间包只不过是将钢水由钢包转送到连铸结晶器的一个容器。)
caster mold(The caster mold is 36 inches in length, and capable of casting slabs 9 inches in thickness and from 24 to 65 inches in width. 该连铸机结晶器长 36in, 能够浇铸厚 9in 、宽 24~65in 的板坯。)
