Terms for subject Bridge construction containing 弯曲

Chinese	English
不对称弯曲	unsymmetrical bending
主要弯曲	primary bending
九十度弯曲	one-quarter bend
九十度弯曲	90° bend
九十度弯曲	ninety degree bend
作45°弯曲	bending through 45°
作用的弯曲应力	applied bending stress
侧向弯曲	lateral bending
侧向弯曲刚度	lateral flexural rigidity
初始弯曲	initial crookedness
单向弯曲	uniaxial bending
单曲率弯曲	single curvature binding
单桩欧拉弹性弯曲屈曲	Euler elastic flexural buckling of single pile
单轴弯曲	uniaxial bending
单轴弯曲	monoaxial bending
压力翼缘中的弯曲应力	bending stress in compression flange
压杆纵向弯曲系数	coefficient of bulking for compressive member
双向弯曲	biaxial bending
双轴弯曲	biaxial bending
双轴弯曲	biaxial flexure
反弯曲	recurvation
反弯曲	inflexion
反向弯曲	reversed bending
反向弯曲	alternating bending
反向弯曲	reverse bend
取决于细长比的纵向弯曲系数φ的值	value for coefficient of buckling depending on slenderness ration
受压且双向弯曲的杆件	member subjected to compression plus biaxial bending
容许弯曲应力	permissible bending stress
容许弯曲应力	allowable flexural stress
小挠度弯曲	bending with small deflection
局部弯曲	locally bending
平板弯曲	bending of plate
平缓弯曲	flat bend
平面弯曲	uniplanar bending
平面弯曲	plane bending
弓形弯曲	bow
弯度不大的曲线	gentle curve
弯扭屈曲	flexural-torsional buckling
弯曲	crookedness
弯曲	curving
弯曲与剪切的综合挠度	combined bending and shear deflection
弯曲中心	centre of flexure
弯曲力	bending force
弯曲力	flexural force
弯曲半径	radius of bending
弯曲压应力	flexural compression stress
弯曲受压	bending compression
弯曲受压及偏心受压	bending compression and eccentric compression
弯曲受压或偏心受压时混凝土的容许应力	allowable stress of concrete in flexural compressing or eccentric compressing
弯曲变形	bend- ing deflection
弯曲变形	bending deformation
弯曲变形	deformation due to bending
弯曲容许应力	allowable bending stress
弯曲屈曲	flexural buckling
弯曲平面	plane of bending
弯曲平面内横截面的高度	depth of cross-section in plane of bending
弯曲平面内的有效长度	effective length in plane of bending
弯曲应力	flexural stress
弯曲弹性模量	modulus of elasticity in binding
弯曲情况	bending condition
弯曲抗力系数	resistance factor for bending
弯曲抗压强度	bending compression strength
弯曲抗拉强度	bending tension strength
弯曲拉应力	flexural tension stress
弯曲挠度	bending deflection
弯曲摩阻	curvature friction
弯曲木材	crooked timber
弯曲理论	flexural theory
弯曲疲劳	bending endurance
弯曲疲劳强度试验	flexural fatigue strength test
弯曲疲劳试验	flexural fatigue test
弯曲破坏	flexural failure
弯曲稳定	stability of flexing
弯曲稳定	stability of buckling
弯曲能力	bending capacity
弯曲钢筋	bent steel bar
弯曲钢筋	bent reinforcement
弯曲面	bending surface
弯曲面	bending plane
弯曲面外的屈曲	buckling out of plane of bending
弯矩曲线	bending moment curve
弹塑性弯曲	elasto-plastic bending
手动弯曲机	hand bender
扭弯屈曲	torsion-bending buckling
承受轴向压应力和弯曲应力的杆件	member subjected to both axial compression and bending stresses
斜弯曲	skew bending
曲梁的弯曲	bending of curved beam
最小弯曲直径	minimum bend diameter
构件顺截面回转半径较小方向弯曲的纵向弯曲临界荷载	bucking critical load of member bended in direction of smaller radius of gyration of cross-section
梁弯曲	beam bending
梁弯曲时的曲率	curvature in bending of beam
梁弯曲理论	beam flexure theory
梁横向弯曲	transverse bending of beam
梁的弯曲	bending of beam
沟谷弯曲	ravine zigzagging
沟谷弯曲	ravine zigzag
矩形截面梁由于集中的力产生的弯曲	bending of beam of rectangular cross section by concentrated force
纵向弯曲	longitudinal bending
纵向弯曲	flexure due to axial compression
纵向弯曲系数	coefficient of buckling
纵向弯曲系数	coefficient of longitudinal buckling
组合轴向和弯曲应力	combined axial and bending stresses
绕主轴弯曲	bending about major axis
绕次轴弯曲	bending about minor axis
负弯曲	negative bending
钢筋弯曲	reinforcement bending
钢筋弯曲机	bender for reinforcement
钢筋弯曲机	bar bender
非对称弯曲	unsymmetrical bending
非弹性弯曲	inelastic bending
非线性弯曲	nonlinear bending
面外弯曲的有效长度	effective length for out-of-plane bending
顺弯曲方向轴向压力对构件平均截面重心的偏心距	eccentricity of axial compressive force in the direction of bending with respect to the gravity centre of average cross-section of member