Terms for subject Plastics containing 弯曲

Chinese	English
交变弯曲应力	alternate flexural stress
交变弯曲强度	alternating bending strength
交变弯曲试验	reverse bend test
交变弯曲试验	alternate bending test
低温弯曲试验	low temperature bend test
低温弯曲试验	cold bend test
偏心形弯曲	offset heart-shaped curves
冲击弯曲试验	shock bending test
压延辊逆向弯曲	calendering roll counter bending
压缩纵弯曲	compression buckling
双弯曲	double curvature
双弯曲壳	double curved shell
双弯曲的	double curved
双反向弯曲	double reverse bend
反弯曲	reversed bending
反向弯曲压延辊调节压延片材幅宽方向厚薄的一种方法	counter bending
同方向弯曲的壳	synclastic
四点弯曲试验	four point flexural test
圆筒弯曲	cylinder bending
局部弯曲塑料形变件	localized bending
屈服弯曲矩	yield bending moment
常规挠度下的弯曲应力	flexural stress at conventional deflection
弓形弯曲	segment bend
弯挠，屈,扭曲	flexure
弯曲	lobster
弯曲塑料制品缺陷	warping
弯曲塑料制品	warp
弯曲的	meandering
弯曲	deflect
弯曲的	bending
弯曲伸长	flexural elongation
弯曲偏置屈服强度	flexural offset yield strength
弯曲冲击试验	flexural impact test
弯曲冲击试验	blow bending test
弯曲刚度劲度	stiffness in bend
弯曲刚性模量	stiffness modulus
弯曲刚性模量	modulus of flexural rigidity
弯曲剥离试验	bending peel test
弯曲剪切试验	bending shear test
弯曲劲度	bending stiffness
纵向弯曲变形	buckling deformation
弯曲变形	bending strain
弯曲回弹性	flexural resilience
弯曲型架	creasing support
弯曲屈服强度	flexural yield strength
弯曲应力	stress in bending
弯曲应力	bend stress
弯曲应力表层结构	curved stressed-skin structure
弯曲应力表层褶皱结构	curved stressed-skirt folded structure
弯曲应力试验机	bending stress tester
弯曲开裂	bending crack
弯曲弹性	transverse elasticity
弯曲弹性	bending elasticity
弯曲弹性模量	modulus of elasticity in flexure
弯曲强度	loop tenacity
弯曲强度	cross-breaking strength
弯曲强度	loop strength
纵向弯曲强度	buckling strength
弯曲性能	flexural properties
弯曲性能	cross breaking properties
弯曲折断试验	bending shear test
弯曲挠度	deflection in bending
弯曲挠度	bending flexure
弯曲断裂载荷	fracture load by bending
弯曲板	curved platen
弯曲桨叶	curved blade
弯曲模板	folding rule
弯曲模板	creasing rule
弯曲模板	bend bar
弯曲深度	buckling depth
弯曲点曲线	knee
弯曲疲劳寿命	bending fatigue life
弯曲疲劳应力	repeated flexural stress
弯曲疲劳强度	flexural fatigue strength
弯曲疲劳试验	bending endurance test
弯曲疲劳试验机	flexural fatigue testing machine
弯曲矩	moment of deflection
弯曲破坏	failure in bend
弯曲纤维应变	fibre strain in flexure
弯曲纤维网结构	curved fibre network
弯曲老化热气焊接	strain ageing
弯曲耐久性	flexural endurance properties
弯曲脆点	bend brittle point
弯曲脆点脆性温度	bending brittle point
弯曲表面	curved surface
弯曲装置	ruffler
弯曲角度	bending angle
弯曲角美	creasing angle
弯曲角	angle of bending
弯曲试条	bent strip specimen
弯曲试条	bend strip
弯曲试样	bent strip specimen
弯曲试验	flexibility test
bending test弯曲试验	flexural test
纵向弯曲试验	buckling test
弯曲试验	bending experiment
弯曲试验器	flex tester
弯曲负荷下变形温度	temperature of deformation under flexural load
纵向弯曲负载	buckling load
弯曲轴	curved axis
折叠弯曲试验	folding bend test
持续弯曲试验	continuous bend test
振动弯曲试验	bending vibration test
易弯曲塑料	flexural plastic
最大弯曲表面应力	maximum surface stress in bend
杨氏弯曲模量	Young's modulus flexural modulus
极限弯曲应力	ultimate bending stress
槽型弯曲	reverse bend
横向弯曲弹性	transverse bending resilience
横向弯曲试验	cross bending test
湿态弯曲强度	wet flexural strength
热弯曲试验	hot bend
热弯曲	heat bending
瞬时弯曲强度	instantaneous bending strength
硬质微孔塑料弯曲试验	bending test for rigid cellular plastics
管弯曲	pipe bending
纵向弯曲	buckle
纵向弯曲强度	cross-breaking strength
缺口试棒弯曲试验	notch bar bending test
耐纵向弯曲性	buckling resistance
耐弯曲疲劳性	flexural fatigue resistance
耐弯曲疲劳性	bending fatigue resistance
耐低温弯曲强度	cold bend strength
耐冷弯曲	cold bend
耐冷弯曲强度	cold bend strength
耐干弯曲强度层压塑料	dry flex
脉动弯曲试验玻纤	bending pulsating test
自由弯曲度	free camber
芯材弯曲柔顺性	mandrel bend flexibility
芯材弯曲试验	mandrel bend test
芯材弯曲试验仪	mandrel bend apparatus
辊弯曲压延机辊	roll bending
边缘弯曲	edge bowing
重复弯曲试验	repeated bend test
铰链式弯曲机	hinged bender
静态弯曲试验	static beaming test
靠模弯曲试验	guide bend test
预弯曲	prebend