Terms containing 夹钳

Subject	Chinese	English
tech.	上夹钳	top clamp
mech.eng.	为了安全，在钻孔的同时，台虎钳和夹钳牢牢地固定住工件，防止材料不小心移位	For safety reasons, vises and clamps securely hold the work piece as the hole is bored in order to prevent material from shifting unexpectedly
tech.	互换虎钳口式夹盘	three-jaw chuck with interchangeable false jaws
tech.	仓缘夹拆除钳	wound clip removing forceps
tech.	传电夹钳	contact jaw
gen.	像虎钳一样夹紧的	as firm as a vice
tech.	全自动夹钳	fully automatic tongs
tech.	冲击夹钳	impact clam
tech.	减速器夹钳	retarder jaw
tech.	减速器夹钳	clamping of jaws
tech.	创橼夹联合钳	clip applying and removing forceps
tech.	制动夹钳试验装置	braking clamp test bench
steel.	助卷器夹钳	wrapper jaw fabrication
tech.	单手快速夹紧卡钳	one hand quick grip wrench
tech.	卡瓦打捞筒夹钳	slip-socket clip
tech.	卡盘钳夹	chuck collet
met.	【压】卷芯夹出钳	coil core removing tongs
met.	卷芯夹出钳	coil core removing tongs
tech.	压力夹钳风门	pressure grip throttle
tech.	压力夹钳风阀	pressure grip throttle
tech.	压夹虎钳	grip vise
tech.	叉形夹钳	fork grip
met.	双夹钳送料	double-gripper feed
tech.	可动夹钳	movable clamp
tech.	台座夹钳	bench holdfast
tech.	台钳夹	vise clamp
tech.	吊石夹钳	stone tongs
tech.	吊石夹钳	nippers
tech.	后定位夹钳	backstop tone
auto.	回转夹钳	swivel vice
met.	固定夹钳	fixed claw
tech.	固定夹钳	stationary clamp
tech.	固定夹钳式制动器	fixed-calliper disk brake
tech.	固定夹钳式制动器	fixed-caliper disk brake
met.	圆嘴夹钳	curved-lip tongs
tech.	均热炉夹钳	soaking pit clamp
tech.	块石提升夹钳	stone lifting tongs
tech.	块石提升夹钳	lifting tongs
met.	坩埚夹钳	crucible tongs
tech.	多整钻头用夹钳	dressing bit tongs
tech.	夹紧钳	clamping jaws (子)
auto.	夹拔钉钳	dog
tech.	夹管钳	gripping pliers
gen.	夹拔钉钳	dog
tech.	夹口虎钳	vise-grip
tech.	夹口钳	clippers
tech.	夹圆钳	round pliers
tech.	夹套管用钳	catheter holding forceps
auto.	夹扭剪切钳	pliers and nippers
auto.	夹持钳	gripping pliers
met.	夹料钳	pull-in dogs (拉伸机的)
met.	夹料钳	pul-in dogs
met.	夹料钳	pulling-in dogs (拉拔用)
roll.	夹料钳复数	dog
tech.	夹料钳	pull-in pliers
auto.	电器软管夹断钳	pinch-off pliers
tech.	夹石钳	stone tongs
auto.	夹管虎钳	tube vice
oil	夹管钳	gripping pliers
archit.	夹紧虎钳	grip vice
tech.	夹紧虎钳	grip vise
el.mach.	夹紧钳	clamping claws
el., sec.sys.	夹紧钳	stick clamp
oil	夹紧钳	clamp sub
plast.	夹紧钳	jaw clamp
archit.	夹紧钳	clincher
archit.	夹紧钳	clamping jaws
auto.	夹紧钳口	gripping jaw
auto.	夹紧钳口	clamping claw
textile	夹线钳	tension nipper
tech.	夹轨钳	rail tongs
hydroel.st.	夹钳	tong
cont.cast.	夹钳	carrying tongs
oil	夹钳	clamp frame
gen.	夹钳具,板子	clam
telecom.	夹钳	nippers
telecom.	夹钳	gripper
telecom.	夹钳	cramp
gen.	夹钳具，子	grab
gen.	接触对焊的夹钳	die
weld.	夹钳	die
tech.	夹住板条或托起混凝土构件的夹钳	bulldog slip
tech.	夹钳	clammer
tech.	夹钳	pincers
tech.	夹钳	sling dog
tech.	夹钳	tweezers
steel.	夹钳板	clam
tech.	夹钳	clamshell
tech.	夹钳	clam
tech.	夹钳	tongs
tech.	夹钳	pliers
tech.	夹钳	hoisting tongs
tech.	夹钳	cram
earth.sc.	夹钳	grab
anim.husb.	夹钳	clew
archit.	夹钳板	clam
archit.	夹钳具	gripper
archit.	夹钳具	tongs
compr.	夹钳	jaw
met.	夹钳	holdfast
met.	夹钳	stirrup
met.	夹钳	grip
met.	夹钳	clamping fixture
met.	夹钳	clamp
archit.	夹钳具	grab
tech.	夹钳	clamping claw
tech.	夹钳	champing jaw
tech.	夹钳	ang-kary (用于百叶窗、拔松钉子、宽松包装等)
gen.	夹钳具	choker
met.	夹钳冷却水箱槽	tongs cooling tank
tech.	夹钳加料机	tongs furnace charger
met.	夹钳升降行程	tong lifting stroke
tech.	夹钳吊架	clamp hanger
met.	夹钳吊车	dogging crane
el.mach.	夹钳型接线柱	clamp type terminal
tech.	点焊机的夹钳外伸长度	maximum throat depth
textile	夹钳夹	nipper block
met.	夹钳夹持行程	tong holding stroke
met.	夹钳小车	plyer
met.	夹钳工	tongsman
met.	夹钳开口度	tongs opening
tech.	夹钳开度	clamp opening
tech.	夹钳开闭机构	tong operated mechanism
auto.	夹钳式的	clip-on
auto.	夹钳式传感器	clip-in sensor
auto.	夹钳式传感器	clamp-on pickup
el.mach.	夹钳式刷握	clamp type brush holder
met.	夹钳式点焊机	pincer spot-welding machine
tech.	夹钳式装再机	roll clamp truck
auto.	夹钳式诊断传感器	clip-on diagnostic sensor
met.	夹钳式起重机	crampoon
met.	夹钳式起重机	crampon
textile	夹钳式边撑	nipper temple
tech.	夹钳式送料机构	feed block
tech.	夹钳提升器	clamp hanger
tech.	对焊机的夹钳机构	clamping mechanism
tech.	夹钳松开	release of jaws (制动器的)
tech.	夹钳槽	clamping slot
tech.	夹钳横梁	lifting beam with tongs
tech.	夹钳爪	grip finger
met.	夹钳痕	grip marks
tech.	玻璃片的夹钳痕	tong mark
met.	夹钳的冷却水箱 槽	tongs cooling tank (轧钢工用的)
tech.	夹钳砌合的露头石层	chain course
tech.	夹钳组件	grip module
tech.	夹钳装置	gripping mechanism
met.	夹钳起重机	dogging crane (夹运锭、坯用)
tech.	夹钳起重机	soaking pit crane
tech.	夹钳距离	die spacing
tech.	夹钳送料	gripper feed
tech.	夹钳钳口	grip finger
gen.	夹锭〔剪线〕钳	pincher
met.	夹锭钳	pincher
met.	夹锭钳	ingot tongs
steel.	夹锭钳	ingot dogs
tech.	G 字形螺旋夹钳	G-cramp
space	安全夹钳	tongs safety
met.	对钳机夹钳	welding jaw
tech.	岩芯夹钳	core tongs
anim.husb.	巢框夹钳额	frons
met.	带卷起重夹钳	coil tongs
tech.	带提升钳夹的起重机	hoist with lifting tongs
met.	平嘴夹钳	straight-lip tongs
tech.	平行面夹钳	parallel cheek pliers
auto.	弓形夹钳	cramp
met.	弧形螺旋夹钳	C-clamp
tech.	弹簧夹头钳	collet closing and broaching tool
dril.	S形夹钳	S-clamp
tech.	C形夹钳	C-clamp
archit.	T 形截面窗钳夹器	T-section cramp
met.	C 形点焊用杠杆式夹钳	C-type spot-welding head
tech.	快作用夹钳	quick-acting clamp
tech.	快速夹钳	quick-acting clamp
gen.	把 M 夹〔固定〕在台钳上	support M in the vice
met.	拉拔机小车夹钳	draw carriage jaw
met.	拉拔机小车夹钳	drawbench jaws
agric.	拔秧钳夹	puller grip
met.	接触夹具钳口	jaw contact
tech.	提升夹钳	lifting tongs
tech.	摩擦夹钳	frictional clamp
plast.	旋螺夹钳	clamp iron
tech.	木工夹钳	wood working clamp
tech.	木工台夹钳	bench screw
tech.	木材夹钳	span dogs
auto.	杆式夹钳	bar clamp
tech.	杠杆夹钳	lever-type clamp
met.	杠杆式夹钳	lever-type clamp
surg.	松开主动脉钳夹	aortic declamping
tech.	板岩瓦片夹钳	jume
tech.	板材夹钳	plate gripping tongs
tech.	楼板夹钳	floor clamp
steel.	模夹钳	mold clamp
nurs.	橡皮障夹钳	rubber dam clamp forceps
tech.	橡胶障夹夹持钳	rubber dam clamp holding forceps
tech.	橡胶障夹夹持钳	rubber dam clamp forceps
met.	气动夹钳	pneumatic gripping
met.	水冷夹钳	water-cooled clamp
auto.	活塞环夹钳压缩器	ring tong
auto.	活塞环夹钳压缩器	ring pliers
auto.	活塞环压缩夹钳	ring compressor pliers
tech.	浮动夹钳盘式制动器	floating-caliper disc brake
tech.	液压夹钳	hydroclamp
met.	液压夹钳送料	hydrogripper feed
tech.	滤气器夹钳	air cleaner clamp
tech.	焊接夹钳	brazing clamp
plast.	焊接夹钳	welding pliers
tech.	焊接夹钳	soldering tongs
tech.	焊接夹钳	welding tongs
met.	焊接夹钳	welding tangs
shipb.	焊接夹钳	welding die
tech.	焊接用夹钳	brazing tongs
tech.	焊条夹钳	tip retainer
tech.	焊条夹钳	welding jig
tech.	焊条夹钳	tip holder
oil	焊条夹钳	electrode holder
weld.	焊条夹钳	bolster
el.	燃料夹钳核	fuel grab
auto.	动用夹钳夹紧	cramp
agric.	用老虎钳夹紧	vise
met.	直嘴夹钳	straight-lip tongs
tech.	砌合夹钳	chain bond
tech.	窗扇钳夹	sash cramp
agric.	管子夹钳	pipe forceps
tech.	管子夹钳	pipe gripper
met.	线夹钳间距	electrode opening
textile	线接触夹钳	line-contact clamp
tech.	线脚钉夹钳	brad setter
tech.	绑丝夹钳	cram frame
auto.	肋形连接夹钳夹钳上相互咬合的拱肋，可以使夹钳在很宽的工作范围内调整	rib joint pliers
tech.	肘节式夹钳	toggle clamp
met.	自锁带卷吊运夹钳	self-closing coil tongs
auto.	薄板夹钳夹紧装置	panel clamp
auto.	虎钳锁定夹卡	vice grips
tech.	虎钳夹	vise clamp
tech.	虎钳夹	vice clamp
construct.	虎钳夹	lock-filer clamp
tech.	虎钳夹	lock-filers clamp
tech.	虎钳夹口	vice grip
tech.	虎钳夹口扳手	vice grip wrench
construct.	螺丝夹钳	cram frame
tech.	螺丝夹钳	hand clamp
met.	螺旋夹钳	screw clamp
auto.	工具螺旋夹钳	screw clamp
agric.	螺旋夹钳	hand screw
tech.	螺旋夹钳	screw cramp
gen.	血管夹钳	serrefine
anim.husb.	裂蹄夹用钳	sand crack forceps
tech.	装料夹钳	loading clamp
tech.	起重夹钳	grab tongs
met.	轧辊提升夹钳	roll lifting tongs
met.	轧辊运输夹钳	roll tongs
tech.	轨道制动夹钳	track-brake jaws
auto.	电器软管夹切断钳	hose pinch-off pliers
auto.	软管夹安装钳	hose-clamp pliers
auto.	软管夹安装钳	hose-clamp installer
met.	运搬夹钳	carrying tongs
tech.	金属板夹钳	plate cramp
tech.	钢卷夹钳	coil clamp
tech.	钢板夹钳	plate clamps
met.	钢锭夹钳	ingot stirrup
met.	钢锭夹钳	ingot tongs
met.	钢锭夹钳	ingot gripper
met.	钢锭夹钳	ingot dogs
met.	钳型焊条夹持器	tongs-type electrode holder
dril.	液压套管钳钳头夹紧装置	head closing system
tech.	钳夹	forceps holder
tech.	钳夹制动器	clamshell brake
tech.	钳夹头	bar hold
agric.	钳夹式水稻拔秧机	pincette-type seedling puller
el.	机械手钳夹抓手	vise tool
tech.	机械手的钳夹抓手	vise tool
otorhinol.	钳夹活检［术］	forceps biopsy
nurs.	钳夹活检［术］	forcep biopsy
railw.	钳夹车	schnabel car
mech.eng.	钻孔用夹钳	drill vise
tech.	钽夹钳	tantalum clips applying forceps
tech.	铆钉夹钳	riveting clamps
tech.	铆钉夹钳	riveting handle
tech.	铜夹钳	copper clamp
tech.	锻锤夹钳	hammer tongs
auto.	长嘴自夹紧钳	long-nose self-grip plier
met.	闪光焊夹紧钳口	flash welding clamping dies
tech.	雷管夹钳	crimping pliers
tools	雷管夹钳,压线钳	crimping pliers
oil	颚式夹钳	alligator grab
CNC	龙门刨床钳夹	planer chuck