Terms for subject Metallurgy containing after

English	Chinese
after-burner	再燃烧器
after-burner	复燃烧器
after-burning	补充燃烧
after-burning	二次燃烧
after-chroming	重复镀铬
after-chroming	二次镀铬
after-combustion	烧完
after-combustion	复燃
after-combustion	烧尽
after-condenser	再冷凝器
after-condenser	二次冷凝器
after-contraction	残余收缩
after-contraction	二次收缩
after-cooler	后冷却器
after-cooler	二次冷却器
after current	余流
after-current	剩余电流
after-effect	副作用
after-effect	后效作用
after-effect	后效应
after effect of disease	后遗症
after end	后端 (板卷等的)
after-etching	后侵蚀
after-expansion	后膨胀
after-expansion	残余膨胀
after-filter	补充过滤器
after-filter	二次过滤器
after-filtration	补充过滤
after-filtration	二次过滤
after-firing zone	均热段
after-firing zone	带式烧结机的后烧段
after flow	残余塑性流变 (停止加载后的)
after-fractionating tower	第二蒸馏塔
after-fractionating tower	二次精馏塔
after-galvanizing rinse	镀锌后淋洗
after generation	乙炔余气
after hardening	滞后硬化
after heater	后热器
after-heating furnace	【团】保温段
after-heating furnace	保温段
after pass	轧后
after-product	后产物
after-product	二次产物
after product	后〔副，二次〕产物
after product	二次产物
after product	副产物
after product	后产物
after-purification	补充净化
after-purification	后净化
after quake	余震
after-shear table	剪切机后辊道
after-shock	余震
after-shrinkage	后收缩
after-shrinkage	残余收缩
after-working	后效应
coke strength after reaction	反应后焦炭强度
cold compression strength after reduction	【团】 还原后的冷抗压强度
cold compression strength after reduction	还原后冷抗压强度
compression resistance after reduction	还原后的抗压强度
cutting after preheating	预热后切割
ductility after creep	蠕变后延性
ductility after creep	蠕变后的延性
elastic after-working	弹性后效
elongation in rope tensile test after fracture	钢丝绳拉伸试验的破断伸长
heat treatment by heat after rolling	轧后余热处理
heat treatment using heat after rolling	轧后余热处理
inclusion index after Ca-treatment	加钙处理后的夹杂物指数
incubation time of strain after load	加载后应变潜伏孕育时间
linear after contraction	【耐】 线性残余收缩
linear after contraction	线性残余收缩
linear after expansion	【耐】 线性残余膨胀
linear after expansion	线性残余膨胀
magnetic after effect	磁后效
porosity after heating	加热后气孔率
quenching after heated in lead	铅浴加热后淬火
quenching after heating in lead bath	铅浴加热后淬火
work-hardening after cold rolling	冷轧加工硬化 (In order to eliminate work-hardening after cold rolling, heat-treatment by annealing is frequently applied. 常常采用退火热处理来消除冷轧加工硬化。)